Back to Search

Ryan ST3KR, G-BYPY, 22 March 2003

Air Accidents (AAIB)

Published on 10 December 2014, 20:50

Summary
aircraft category
general-aviation-fixed-wing
aircraft type
RYAN ST3KR
bulk published
1
date of occurrence
2003-03-22
location
Eddsfield, near Beverley, East Yorkshire
registration
G-BYPY
report type
correspondence-investigation

Report Overview

Ryan ST3KR, G-BYPY

Download report:

dft-avsafety-pdf-021735.pdfDownload (63.69 kb)

This overview has been truncated. Please refer to the official documents below for the complete canonical report.

Official Documents

Document Content Preview

Extracted text from the first few pages of the official documents.

dft-avsafety-pdf-021735.pdf

1 Ryan ST3KR, G-BYPY AAIB Bulletin No: 6/2003 Ref: EW/G2003/03/23 Category: 1.3 Aircraft Type and Registration: Ryan ST3KR, G-BYPY No & Type of Engines: 1 Gladden Products Kinner R-56 piston engine Year of Manufacture: 1941 Date & Time (UTC): 22 March 2003 at 1520 hrs Location: Eddsfield near Beverley Type of Flight: Private Persons on Board: Crew - 1 Passengers - 1 Injuries: Crew - None Passengers - None Nature of Damage: Damage to propeller tips Commander's Licence: Private Pilot's Licence Commander's Age: 67 years Commander's Flying Experience: 7,375 hours (of which 19 were on type) Last 90 days - 15 hours Last 28 days - 6 hours Information Source: Aircraft Accident Report Form submitted by the pilot The aircraft had just completed an uneventful takeoff from Runway 09 and was climbing through 300 feet when the engine began to lose power. As there were no suitable into-wind fields within gliding distance, the pilot initiated a left turn on a downwind leg for an into-wind landing on Runway 18, which is an emergency runway. He was able to maintain height on the downwind leg but there was insufficient engine power to climb. When the pilot lined up on final approach, he was looking towards the sun in hazy conditions. He had just selected full flap when the propeller struck power lines which transect the approach path to the runway. The landing was completed successfully, after which a two inch section was found to be missing from each propeller blade tip. The pilot reported that he had completed the usual pre-departure checks, which included operation of the carburettor heat control. Initial inspections failed to identify any obvious problem with the engine. However, the engine will be tested once a new propeller has been manufactured and any significant findings will be reported upon in a future edition of the AAIB Bulletin.

Change History

  • First published.

Related Entities

Search the database for other reports involving these entities.